Subli Glaze Subli mattalakka T.SIN - spray - tilaustuote
DIGI-Coat / Subli Glaze MATTA (tumman sininen) Kirkas MATTA spraylakka Overview Want to sublimate to uncoated products. Description Subli Glaze Matte Coating to prepare for sublimation printing. With... Lue lisää
- Tuotekoodi: su1099
DIGI-Coat / Subli Glaze MATTA (tumman sininen)
Kirkas MATTA spraylakka
Overview
Want to sublimate to uncoated products.
Description
Subli Glaze Matte Coating to prepare for sublimation printing. With this coating, you create a polymer layer on uncoated products to which sublimation
inks can adhere.
Application:
Shake the can for 1 minute.
The surface to be coated must be clean, dry and free of grease
Hold the can approx. 300 mm away from the surface and apply lightly in several passes at room temperature. This will give you a matt finish.
Allow to air dry for approx. 10 minutes, then harden in the oven at 160°C for 15 to 20 minutes.
Contents are estimated to coat about 20 square feet (2 Sq meters), although your coverage may vary. Actual coverage is affected by many factors,
including:
>porosity of the substrate surface
>density of application
>number of coatings applied
Use caution - as with any aerosol product - to work with this product in well-ventilated areas, and away from any open flame. Read container for
additional instructions prior to use.
Contents 13.5 oz (400ml)
NOTE: DigiCoat is not recommended for use with acrylic products, as acrylics generally cannot withstand the heat required to cure the coatings, or
heat and pressure required for dye sublimation.
YOUTUBE:
https://www.youtube.com/watch?v=t6sOn-BdXgk
https://www.youtube.com/watch?v=KkUOwKBH45g
https://www.youtube.com/watch?v=F1Y9cZxTgLw
OHJE: http://www.subliglaze.com/subli-glaze-sublimation-videos/
Kirkas MATTA spraylakka
Overview
Want to sublimate to uncoated products.
Description
Subli Glaze Matte Coating to prepare for sublimation printing. With this coating, you create a polymer layer on uncoated products to which sublimation
inks can adhere.
Application:
Shake the can for 1 minute.
The surface to be coated must be clean, dry and free of grease
Hold the can approx. 300 mm away from the surface and apply lightly in several passes at room temperature. This will give you a matt finish.
Allow to air dry for approx. 10 minutes, then harden in the oven at 160°C for 15 to 20 minutes.
Contents are estimated to coat about 20 square feet (2 Sq meters), although your coverage may vary. Actual coverage is affected by many factors,
including:
>porosity of the substrate surface
>density of application
>number of coatings applied
Use caution - as with any aerosol product - to work with this product in well-ventilated areas, and away from any open flame. Read container for
additional instructions prior to use.
Contents 13.5 oz (400ml)
NOTE: DigiCoat is not recommended for use with acrylic products, as acrylics generally cannot withstand the heat required to cure the coatings, or
heat and pressure required for dye sublimation.
YOUTUBE:
https://www.youtube.com/watch?v=t6sOn-BdXgk
https://www.youtube.com/watch?v=KkUOwKBH45g
https://www.youtube.com/watch?v=F1Y9cZxTgLw
OHJE: http://www.subliglaze.com/subli-glaze-sublimation-videos/