Digi-Coat Subli Prep on primeri, eli kiinnityksen parantamista varten.
Tätä käytetään yhdessä ja ennen Digi-Coat/ Subli Glaze sprayta.
NOTE: DigiCoat is not recommended for use with acrylic products, as acrylics generally cannot withstand the heat required to cure the coatings, or heat and pressure required for dye sublimation.
When you are applying your chosen Subli Glaze™ product to any hard substrate with a smooth surface such as metal, glass, or acrylics, Subli Glaze™ Adhesion Promoter is first required to allow your chosen Subli Glaze™ product to bond effectively to the substrate. Use it to
Allow your chosen Subli Glaze™ product to adhere to hard substrates with a smooth surface Prevent separation of coating and substrate after pressing
How to use Subli Glaze™ Adhesion Promoter
Ensure all surfaces to be pre-treated are clean, dry, and free from dirt or grease. Apply liberally with a soft clean cloth over the surface to be coated to ensure even coverage. Allow Subli Glaze™ Adhesion Promoter to bond with the surface for approximately 30 seconds before removing any excess with clean cloth. When removing the excess, try to eliminate any grease, or smudge marks if any present.